|
|
|||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
GReddy 60mm P/H/W Meters These are GReddy's top of the line gauges. By splitting up the gauge into 3 main parts: (head, datalink & sensor) they've added extra features like a warning point with a warning light, peak recall, and a peak mode. The large 60mm (2.36") dial is easy read because of the clear markings and wide 270deg. sweep. The Pearl White and Black units are backlit Green while the Silver meters are backlit in Orange. Special gauges for Air Fuel Ratio, 3.0kg/cm2 Boost, and a line of Silver gauges are only available in this Electronic Warning Series.
GReddy 60mm Electric meters GReddy's 60mm (2.36" dia) gauges operate by electrical sensors. Temp. and Press. sensors keep fluids and gases out of the passenger compartment. There is just a thin electrical harness to feed through the fire-wall to the gauge. Available in Black or Pearl White bezel and dial. Backlit Green.
GReddy 52mm Elec Meters Similar to GReddy's 60mm Electronic gauges, these smaller 52mm (2" dia.) units allow you to mount the electronic sensors in the engine compartment and run a thin electrical harness into the driver's compartment. Available in a black bezels with either a white or black dial. (back-lit Green)
GReddy 60mm Mechanical Meters Simple to use, these 60mm (2.36"dia.) mechanical turbo boost gauges just plug in directly to the intake manifold. And the lighting is just two wires: 12v light source and a chassis ground. Available in pearl white or black both are backlit green.
|
 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||
